TM 5-2420-230-24-1
21. Attach the dial-type inch pound torque
wrench to Tool #3563982. Install the shaft
retaining nut using Tool #3563982. Torque the
nut to 25-35 inch pounds (Figure 77).
Figure 77
22. Remove the torque wrench from the tool.
23. Place a new locking star nut over the retain-
ing nut. Use Tool #3563982 to hold the shaft
retaining nut in position (Figure 78).
Figure 78
24. While holding the retaining nut in place,
tighten the star nut to 10-12 foot pounds of
torque, using the torque wrench and Tool
#3563992. Do not allow the shaft retaining nut
to move while torquing the star nut (Figure 79).
Figure 79
K-70