TM 5-2420-230-24-2
L-31. OIL PAN REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Test Equipment
References
None
None
Tools and Special Tools
Equipment Conditions
Tool kit, common no. 2, Item 36, Appendix B
TM or Para
Condition Description
Tool kit, general mechanics, Item 38, Appendix B
Para 4-4
Oil drained.
Para 14-6
Front drive axle disconnected.
Materials/Parts
Three Bond 1207-C, Item 67, Appendix C
Drawings Required
Gasket, Item 75, Appendix D
TM 5-2420-230-24P Figure 21
Personnel Required
MOS 62B, Construction Equipment Repairer
Estimated Time to Complete
Refer to MAC in Appendix B
a. Removal.
Fuel and oil are slippery and can cause falls. To avoid injury, wipe up spilled fuel or oil with rags.
(1)
Deleted.
(2)
Refer to page L-119 for oil pan removal.
b. Installation.
Adhesives, solvents, and sealing compounds burn easily and give off vapors that are harmful to the
skin and clothing. To avoid injury or death, keep away from open fire when using these materials, and
use only in well-ventilated areas. If adhesives, solvents, or sealing compounds contact the skin or
clothing, wash immediately with soap and water, and rinse thoroughly. Failure to comply may result
in injury or death to personnel.
(1)
Refer to page L-157 for installation.
(2)
Deleted.
c. Follow-On Maintenance.
(1)
Refill oil (Para 4-4).
(2)
Connect front drive axle (Para 14-6).
END OF TASK
Change 1
