TM 5-2420-230-24-2
d. Repair.
Adhesives, solvents, and sealing compounds burn easily and give off vapors that are harmful to the
skin and clothing. To avoid injury or death, keep away from open fire when using these materials,
and use only in well-ventilated areas. If adhesives, solvents, or sealing compounds contact the skin
or clothing, wash immediately with soap and water, and rinse thoroughly. Failure to comply may
result in injury or death to personnel.
Exercise extreme caution when working with acid, wear rubber apron to prevent clothing being
damaged. Always wear safety goggles and rubber gloves and do not smoke when performing
maintenance with acid tank. Acid can eat the skin. If acid contacts clothes, remove and flush with
water. If acid contacts skin, immediately flush skin and get immediate medical attention. Failure to
comply may result in injury or death to personnel.
(1)
Refer to page L-276 for cup plug replacement.
(2)
Refer to page L-278 for valves grinding.
(3)
Refer to page L-279 for valve seat grinding.
e. Assembly.
Refer to page L-284 for assembly.
f. Follow-On Maintenance.
Install cylinder head (Para L-21).
END OF TASK
Change 1
L-52