TM 5-2420-230-24-2
L-42. ENGINE REPAIR (CAMSHAFT GEAR REPLACEMENT).
This Task Covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Test Equipment
References
None
None
Tools and Special Tools
Equipment Conditions
Tool kit, general mechanics, Item 38, Appendix B
TM or Para
Condition Description
Camshaft removed.
Materials/Parts
Grease, lithium, Item 34, Appendix C
Drawings Required
TM 5-2420-230-24P Figure 6
Personnel Required
MOS 62B, Construction Equipment Repairer
Estimated Time to Complete
Refer to MAC in Appendix B
a. Removal.
Refer to page L-237 for removal.
b. Installation.
Adhesives, solvents, and sealing compounds burn easily and give off vapors that are harmful to the
skin and clothing. To avoid injury or death, keep away from open fire when using these materials, and
use only in well-ventilated areas. If adhesives, solvents, or sealing compounds contact the skin or
clothing, wash immediately with soap and water, and rinse thoroughly. Failure to comply may result in
injury or death to personnel.
Refer to page L-237 for installation.
c. Follow-On Maintenance.
Install camshaft (Para L-34).
END OF TASK
Change 1
