TM 5-2420-230-24-2
Section 0 - Engine Disassembly and Assembly - Group 00
Piston and Rod Assemblies - Removal (0-64)
B Series Shop Manual
Page 0-37
Move the idler retainer until the pin in the No. 1 cap
disengages the slot in the retainer. Remove the balancer
assembly.
Piston and Rod Assemblies - Removal
(0-64)
Mark each rod cap according to cylinder.
Rotate the engine on the rebuild stand so the cylinder
bores are in a horizontal position.
Rotate the crankshaft so the pistons are below the carbon
deposits above the ring travel area.
Use a scraper or a blunt edged instrument to loosen the
carbon deposits. Do not damage the cylinder with the
scraper.
L-126
