TM 5-2420-230-24-2
Section 0 - Engine Disassembly and Assembly - Group 00
Crankshaft - Removal (0-65)
B Series Shop Manual
Page 0-39
12 mm
Remove the capscrews, rod cap and rod bearings.
Mark the cylinder number on the back side of the rod
Catch the piston with one hand while pushing the rod and
piston assembly out of cylinder bore. Care must be taken
not to mutilate the connecting rod or bearing.
NOTE: Disassembly of the piston/rod assembly is described
in Component Section 1.
Crankshaft - Removal (0-65)
23 mm
Rotate the engine to a horizontal position so the main
bearing caps are accessible. Remove the capscrews from
the main bearing caps.
The main caps should be numbered. If they are not, mark
them with the correct number.
L-128
