TM 5-2420-230-24-2
Section 0 - Engine Disassembly and Assembly - Group 00
Turbocharger Drain Tube - Removal (0-66)
B Series Shop Manual
Page 0-41
Install the main caps in their corresponding positions.
When correctly installed, the tangs (slots) should both be
on the same side.
NOTE: #1 is to the front of the block.
Turbocharger Drain Tube - Removal
(0-66)
3/4 Inch Drift & Hammer
Drive the drain tube out from the inside of the cylinder
block.
Cylinder Block - Removing From the
Rollover Stand (0-67)
18 mm
Remove the cylinder block from the rollover stand.
NOTE: Refer to Component Section 1 for cleaning and in-
spection of the cylinder block.
4B Cylinder Block Weight:
91 Kg [201 lb]
6B Cylinder Block Weight:
124 Kg [275 lb]
Engine Assembly (0-68)
Cylinder Block - Prepare for Assembly
(0-69)
Install the cylinder block to the rollover stand.
NOTE: Make sure the cylinder block has been cleaned and
inspected as described in Component Section 1.
L-130
