Cylinder Head - Tightening (0-102)
Section 0 - Engine Disassembly and Assembly - Group 00
B Series Shop Manual
Follow the numbered sequence and recheck the torque
on all capscrews to 90 Nm [66 ft-lb].
Follow the numbered sequence and tighten ONLY THE
SIX LONG CAPSCREWS (No. 4, 5, 12, 13, 20 ,21) to 120
Nm [89 ft-lb].
Follow the numbered sequence and turn all capscrews an
additional 90 of rotation.
As an overcheck to make sure all capscrews have been
rotated 90, check the torque on all capscrews to 136 Nm
[102 ft-lb]. If any capscrews turn at 136 Nm [102 ft-lb]
loosen only that capscrew and retighten using the above