TM 5-2420-230-24-2
B3.9 and B5.9 Series Engines
Cylinder Head (002-004)
Section 2 - Cylinder Head - Group 02
Page 2-17
After the torque has been applied, mark the cylinder head
at the location of the dot.
Position the socket on the capscrew such that the mark on
the socket is at the same point as the window on the
capscrew.
Turn the socket until the mark on the socket aligns with the
mark on the cylinder head.
8 mm
Tighten the 8-mm pedestal capscrews.
[18 ft-lb]
L-813