TM 5-2420-230-24-2
Flywheel (016-005)
B3.9 and B5.9 Series Engines
Page 16-12
Section 16 - Mounting Adaptations - Group 16
WARNING
The component weighs 23 kg [51 lb] or more. To avoid
personal injury, use a hoist or get assistance to lift the
component.
Inspect the rear face of crankshaft and flywheel mounting
flange for cleanliness and raised nicks or burrs.
Install the flywheel on the guide pins.
Lubricate the threads of the capscrews and the surface of
the washers with clean lubricating engine oil.
Install the six capscrews.
Remove the t-handles and guide pins.
Install the remaining capscrews into the holes from which
the guide pins were removed.
18 mm
Barring Tool, Part No. 3824591
Hold the crankshaft when tightening the flywheel
capscrews.
Tighten the capscrews in a star pattern.
Torque Value: 137 Nm
[101 ft-lb]
Refer to the equipment manufacturer's procedures to in-
stall the transmission.
L-1340