TM 5-2420-232-10
0055
INTRODUCTION CONTINUED
WARNING
Components removed and installed during this procedure are very heavy. Use assistance, caution,
and follow safe work practices when handling them. Lifting equipment available at the staging area
must be used. Stand clear of wheels, backhoe, and loader areas when the machine is operating.
There is no clearance for personnel in these areas when machine operates. Crushing could occur,
resulting in injury or death to personnel.
All personnel working in machine operating areas during C-130 loading operations must wear
hearing protection. Failure to wear hearing protection may result in hearing loss.
5.
Two personnel are required to prepare the machine for air transport by C-130.
6.
Ground guide assistance is MANDATORY when loading/unloading machine into C-130 aircraft.
WARNING
Stand clear of wheels, loader, and backhoe areas when machine is operating. There is no clearance
for personnel in these areas when machine operates. Crushing could occur, resulting in injury or
death to personnel.
7.
Throughout procedure, be aware of potential hazards from loader/backhoe attachment areas. Stand clear of attachment
area when machine is operating.
END OF TASK
TOOLS AND EQUIPMENT
00055
1.
Tools and equipment required to prepare the machine for air transport by C-130 are included in the BII stowed in tool-
boxes on machine (Table 2, WP 0031).
2.
Reinstall mounting hardware for all removed components on machine, to secure against loss during transport.
END OF TASK
Change 1
0055-2