TM 5-3805-280-24-2
Camshaft, Balancer Shafts and Timing Gear Train
16
8. Install thrust plate cap screws and tighten to
53
specifications.
Camshaft Thrust Plate Cap Screws--Specification
Torque ............................................................................. 35 Nm (26 lb-ft)
RG,16,DT7474 1914NOV972/5
9. With JD254A Timing Tool resting on nose of crankshaft
and center of camshaft (as shown), turn camshaft until
timing mark (A) on camshaft gear aligns with timing
tool.
A--Timing Mark
Continued on next page
RG,16,DT7474 1914NOV973/5
13-285
