TM 5-3805-280-24-2
Fuel System
35
7. Push pump drive gear firmly onto shaft taper. Install
45
washer and retaining nut (A) onto end of shaft. Tighten
retaining nut to following specifications:
DP201 and DP203 Lucas Fuel Injection Pump Drive Gear-To-Shaft
Retaining Nut--Specification
Torque ............................................................................. 81 Nm (60 lb-ft)
A--Drive Gear Retaining Nut
RG,35,JW7603
1920NOV972/5
IMPORTANT: DO NOT overtighten cap screws on
pump cover plate to avoid damage to
O-ring.
8. Install access cover plate (B) using a new O-ring, if
needed. Apply LOCTITE 242 (TY9370) to cap screw
threads and tighten to specifications.
Rotary Injection Pump Front Access Plate Cap Screws--
Specification
Torque ............................................................. 2 Nm (1.7 lb-ft) (20 lb-in.)
B--Injection Pump Drive Cover
Continued on next page
RG,35,JW7603
1920NOV973/5
13-424