TM 5-3805-281-24-2
Cylinder Block, Liners, Pistons, and Rods
REMOVE CYLINDER LINERS
1. Remove cap screws and washers securing liners to
cylinder block.
2. Number cylinder liners and mark fronts to assure
correct assembly.
IMPORTANT: Keep matched pistons and liners
together. Liners must be reinstalled in
same cylinder bore.
Removing Cylinder Liners
3. Use D1062AA or D01073AA Cylinder Liner Puller (B)
to remove cylinder liner (A).
RG,RG34710,1115
1923OCT971/3
IMPORTANT: When using D01062AA (or D01073AA)
Cylinder Liner Puller (B) to remove
liners (A), be sure jaw (C) of puller is
correctly positioned before attempting
to remove liner.
DO NOT over-tighten liner puller to
remove liners. Doing so could easily
break liners.
D01062AA or D017073AA Cylinder Liner Puller
Continued on next page
RG,RG34710,1115
1923OCT972/3