TM 5-3805-281-24-2
Speed Controls
15. Pull injection pump lever rapidly to fast idle and then
decelerate to slow idle. Slow idle must be to
specification.
Engine Slow Idle--Specification
Speed .......................................................................... 1050 + 100 - 0 rpm
NOTE: Injection pump shown removed for clarity of
photograph.
Turning the supplementary idle screw (H) in no more than
1/4 of a turn may help to reduce surging or hunting. If
surging or hunting continues, repair injection pump.
16. Stop the engine.
17. Connect the cable to lever.
Check that the threaded portion of cable is centered
in bulkhead bracket. Loosen and tighten the nuts to
centered threaded portion of cable in bulkhead
05
bracket. Cable can be adjusted in the bulkhead
0515
bracket if more cable travel is need in one direction.
7
18. Do Engine Control Motor and Sensor Adjustment and
then the Engine Speed Learning Procedure. (See
procedures in this group.)
G--Internal Slow Idle Stop
H--Supplementary Idle Screw
CED,OUOE003,1084
1908SEP984/4
12-20