TM 5-3805-294-10
0019
REMOVING CRUSH-ALL - Continued
12
14
13
8
9
11
HYEX03433
Figure 17. Raise Boom.
25.
Lift and rotate safety lock pin lever (Figure 17, Item 13) to unlock position.
WARNING
With quick latch wedges disengaged from crush-all, the crush-all could fall off of the quick
latch. Ensure that personnel are clear of equipment when removing or installing crush-all.
Slowly retract or extend bucket cylinder when removing or installing crush-all. Failure to
comply may result in injury or death to personnel.
26.
Fully extend bucket cylinder (Figure 17, Item 8) until quick latch wedges (Figure 17, Item 9) are fully retracted.
27.
Retract bucket cylinder (Figure 17, Item 8), arm cylinder (Figure 17, Item 14), and lower boom to position crush-
all (Figure 17, Item 11) on the ground.
28.
Retract bucket cylinder (Figure 18, Item 8) and position quick latch (Figure 18, Item10) in vertical position.