TM 5-3805-294-10
0019
JAMMING - Continued
35
34
HYEX03149
Figure 12. Push Crush-All Rotor Backwards.
5.
If material is jammed between the curtain (Figure 12, Item 35) and rotor (Figure 12, Item 34), raise curtain.
6.
If material will not dislodge, contact Field Level Maintenance.
END OF TASK
REMOVING CRUSH-ALL
1.
Raise boom (Figure 13, Item 12) to allow adequate ground clearance of crush-all (Figure 13, Item 11).
12
14
11
HYEX03432
Figure 13. Position Crush-All.
2.
Curl crush-all (Figure 13, Item 11) under as shown in Figure 13.
3.
Extend arm cylinder (Figure 13, Item 14), lower boom (Figure 13, Item 12), and position crush-all (Figure 13,
Item 11) on ground.
4.
Shutdown machine. (WP 0009)