TM 5-3805-294-10
0019
OPERATION - Continued
34
31
30
32
33
11
HYEX01499
Figure 9. Crush-All Operation.
7.
Curl crush-all (Figure 9, Item 11) to vertical position.
8.
Release attachment pedal lock (Figure 9, Item 30).
9.
Press attachment pedal (Figure 9, Item 31) to turn on Crush-All (Figure 9, Item 11).
10.
Allow Crush-All (Figure 9, Item 11) to run for 5 minutes with no load.
11.
Press attachment pedal (Figure 9, Item 31) and press button (Figure 9, Item 32) to open lid (Figure 9, Item
33).
NOTE
Scooping material is best performed by arming into the material, then boom up and curl as
the Crush-All is elevated above material.
12.
Scoop material and raise Crush-All (Figure 9, Item 11) away from material.
13.
Curl Crush-All (Figure 9, Item 11) to vertical position.
NOTE
Reduce dust by keeping bottom of Crush-All close to stock pile.
14.
Swing Crush-All (Figure 9, Item 11) over stock pile.
15.
Press button (Figure 9, Item 34) to close lid (Figure 9, Item 32).
16.
Allow all material to pass through crush-all (Figure 9, Item 11).
NOTE
To avoid jamming, hold attachment pedal until all material has been discharged.
17.
Release attachment pedal (Figure 9, Item 31) to turn off crush-all (Figure 9, Item 11).
