TM 5-3805-294-10
0020
TOOL INSTALLATION - Continued
22
23
24
12
26
25
HYEX01326
Figure 12.
Breaker Tool Lock Bolt.
2.
Push the retaining axle (Figure 12, Item 24) out of the breaker (Figure 12, Item 12) through hole (Figure 12,
Item 25).
3.
Repeat Steps 1 and 2 for other retaining axle.
4.
Lubricate bushing (Figure 12, Item 26) with grease.
WARNING
Breaker tools weigh approximately 275 lb (102 kg). Do not attempt to lift or move tools without
the aid of an assistant and suitable lifting device. Failure to comply may result in injury or
death to personnel.
NOTE
Ensure cavity is free of debris and tool is properly lubricated.
5.
With the aid of an assistant and suitable lifting device, slide tool (Figure 13, Item 27) into breaker (Figure 13,
Item 12) with side notches (Figure 13, Item 28) in alignment with axle slots (Figure 13, Item 29).
