TM 5-3805-294-10
0020
TOOL INSTALLATION - Continued
29
12
27
28
HYEX01327
Figure 13.
Insert Breaker Tool.
6.
Install retaining axle (Figure 14, Item 24) to breaker (Figure 14, Item 12).
12
24
23
22
HYEX01328
Figure 14.
Lock Breaker Tool.
7.
Press and turn lock bolt (Figure 14, Item 22) to locked position with slot (Figure 14, Item 23) pointed to top of
breaker (Figure 14, Item 12).
8.
Repeat Steps (Figure 14, Item 6) and (Figure 14, Item 7) for other retaining axle.
END OF TASK
OPERATING IMPACT BREAKER
1.
Start the machine. (WP 0007)
2.
Select work mode BREAKER 1 on the monitor. (WP 0018)
CAUTION
Breaker must be lubricated every 2 hours of use and every hour during dusty conditions.
Failure to comply may result in damage to the attachment.
NOTE
Keep tool perpendicular to work surface.
Keep machine close to work area.
Maintain constant, even pressure as tool penetrates work surface.