TM 5-3805-294-10
OPERATOR MAINTENANCE
BUCKET TEETH REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Equipment Condition
Machine safely parked and shut down.
Hammer, Hand, 3 lb (WP 0095, Table 2, Item 5)
Punch, Pin (WP 0095, Table 2, Item 9)
Time to Complete
Personnel Required
0.2 Hour(s)
Horizontal Construction Engineer 12N (1)
References
DA FORM 5988-E or DA FORM 2404 (WP 0094)
HEAVY DUTY BUCKET TOOTH REMOVAL
1.
Using hammer and pin punch, drive out pin (Figure 1, Item 1) from tooth (Figure 1, Item 2) and shank (Figure
1, Item 3).
3
1
2
HYEX01282
Figure 1.
Tooth Removal.
2.
Remove tooth (Figure 1, Item 2) from shank (Figure 1, Item 3).
END OF TASK
