TM 5-3805-294-23-1
0015
Table 1. DTC 94.03 - Low-Pressure Fuel Signal Out of Range High - Continued.
Test or Inspection
Corrective Action
Malfunction
1.
Turn key switch to ON position,
15.
Short to Voltage
but DO NOT START ENGINE
Between Engine
(TM 5-3805-294-10). (Volume
Wire Harness
Connector J03
5, WP 0794)
Socket C2 and
Ground.
2.
Measure voltage (Volume 3,
WP 0369) between engine
wiring harness connector J03
socket C2 (Volume 5,
WP 0800, Figure 48) and a
known good ground. Note
reading.
3.
Turn key switch to OFF
1.
If less than 0.5 volts, proceed
position (TM 5-3805-294-10).
to Malfunction 16.
(Volume 5, WP 0794)
2.
If greater than 0.5 volts,
proceed to Malfunction 17.
1.
Turn key switch to ON position,
16.
Check For DTC
but DO NOT START ENGINE
94.03 Active Status
(TM 5-3805-294-10). (Volume
Change With
Engine Wiring
5, WP 0794)
Harness Connector
J03 Disconnected.
2.
Clear and refresh DTCs. Many
new DTCs will be active. Only
note if DTC 94.03 is still an
active DTC. (Volume 3,
WP 0362)
3.
Turn key switch to OFF
1.
If DTC 97.04 is still an active
position (TM 5-3805-294-10).
DTC, proceed to Malfunction
21.
(Volume 5, WP 0794)
2.
If DTC 97.04 is not an active
DTC, proceed to Malfunction
17.
0015-8