TM 5-3805-294-23-1
0023
Table 1. DTC 100.18 - Engine Oil Pressure Signal Moderately Low - Continued.
Test or Inspection
Corrective Action
Malfunction
3.
Turn the key switch to the ON
position, but DO NOT START
ENGINE (TM 5-3805-294-10).
(Volume 5, WP 0794)
4.
Select Readings and select
Connect to Model(s). (Volume
3, WP 0363)
5.
Select Dearborn Protocol
Adapter (DPA 4+) USB for the
Readings Adapter, and select
OK. (Volume 3, WP 0363)
6.
Select Engine Control Unit
(ECU) Only. (Volume 3,
WP 0363)
7.
Under Connected Data Points,
select ECU - (shown with
engine serial number).
(Volume 3, WP 0363)
8.
Under ECU - (shown with
engine serial number), select
ECU - Data List - All. (Volume
3, WP 0363)
9.
Under ECU - Data List - All,
select Engine Oil Pressure
Input Voltage. (Volume 3,
WP 0363)
10.
Monitor the Engine Oil
Pressure Input Voltage.
Voltage should be between 0.3
- 0.7 volts. Note reading.
11.
When finished monitoring,
select Readings and select
Disconnect From Model(s).
(Volume 3, WP 0363)
12.
Select Yes to terminate your
readings connection. (Volume
3, WP 0363)
0023-5