TM 5-3805-294-23-1
FIELD MAINTENANCE
DTC 110.04 - COOLANT TEMPERATURE SIGNAL OUT OF RANGE LOW
INITIAL SETUP:
References (cont.)
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
Volume 3, WP 0345
(Volume 5, WP 0796, Table 2, Item 119)
Volume 3, WP 0362
Accessory Kit, MSD Electronic Equipment
Volume 3, WP 0369
(Volume 5, WP 0796, Table 2, Item 2)
Volume 3, WP 0412
Multimeter, Digital
Volume 4, WP 0508
(Volume 5, WP 0796, Table 2, Item 77)
Volume 4, WP 0510
Probe Set, Standard
Volume 4, WP 0511
(Volume 5, WP 0796, Table 2, Item 91)
Volume 5, WP 0800
Test Set, MSD Electronic Systems
(Volume 5, WP 0796, Table 2, Item 116)
Equipment Condition
Machine safely parked and shut down
Personnel Required
(TM 5-3805-294-10). (Volume 5, WP 0794)
Construction Equipment Repairer 91L (2)
Test Equipment Setup for MSD and Service
ADVISOR. (Volume 3, WP 0375)
References
TM 5-3805-294-10 (Volume 5, WP 0794)
Troubleshooting Sequence
DTC 110.04
When DTC is Displayed
Whenever the ignition is on and the error is active.
Related Information
The coolant temperature input voltage below the sensor's low voltage specification. This corresponds to a
temperature that is higher than what is physically possible for coolant temperature.
Alarm Level
Warning.
Control Unit Response
The ECU uses a default coolant temperature of 194F (91C).
0033-1