TM 5-3805-294-23-1
0116
Table 1. Engine Does Not Develop Full Power - Continued.
Test or Inspection
Corrective Action
Malfunction
12.
Shut down engine and turn key
1.
If Throttle Position is 97% or
switch to OFF position. (TM
higher proceed to Malfunction
5-3805-294-10) (Volume 5,
17.
WP 0794)
2.
If Throttle Position is not 97%
or higher proceed to
Malfunction 13.
1.
Remove cab rear tray.
13.
Connector X27 Has
Damage or Loose
(Volume 4, WP 0566)
Pins/Sockets.
2.
Disconnect connector X27.
(Volume 5, WP 0800, Figure
93)
3.
Visually inspect connector X27
1.
If damaged or has loose pins/
for damage and loose pins/
sockets, replace cab wiring
sockets.
harness for pin side of
connector (Volume 4,
WP 0504) or replace right-
hand console switch panel for
socket side of connector.
(Volume 4, WP 0525)Restore
machine to original condition
and operate engine through
normal speed and load. (TM
5-3805-294-10) (Volume 5,
WP 0794)Clear and refresh
DTCs. (Volume 3, WP 0362)
2.
If not damaged and does not
have loose pins/sockets,
proceed to Malfunction 14.
Measure resistance (Volume
1.
If between 4.5 - 6.0 kohms,
14.
proceed to Malfunction 15.
Between Connector
3, WP 0369) between
X27 Socket 1 and
connector X27 socket 1 and
2.
If not between 4.5 - 6.0 kohms,
Socket 3 is Not
socket 3. (Volume 5,
replace right-hand console
Within
WP 0800, Figure 93) Note
switch panel. (Volume 4,
Specifications.
reading.
WP 0525)Restore machine to
original condition and operate
engine through normal speed
and load. (TM 5-3805-294-10)
(Volume 5, WP 0794)Clear
and refresh DTCs. (Volume 3,
WP 0362)
0116-7