TM 5-3805-294-23-1
0116
TROUBLESHOOTING PROCEDURE
Table 1. Engine Does Not Develop Full Power.
Test or Inspection
Corrective Action
Malfunction
Were you referred to this test
1.
If you were referred to this test,
1.
Check For Active
while performing the
proceed to Malfunction 2.
DTCs.
diagnostic procedures for a
2.
If you were not referred to this
DTC.
test, discontinue this
troubleshooting procedure and
perform procedures for active
DTCs. Resolve all DTCs
before continuing this
procedure.
1.
Turn key switch to ON position,
2.
Perform Harness
but DO NOT START ENGINE.
Diagnostic Mode
(TM 5-3805-294-10) (Volume
Test.
5, WP 0794)
2.
Perform Harness Diagnostic
Mode Test. Note any active
DTCs. (Volume 3, WP 0345)
3.
Turn key switch to OFF
1.
If any DTCs were displayed
position. (TM 5-3805-294-10)
active during test, discontinue
this troubleshooting procedure
(Volume 5, WP 0794)
and perform procedure for
active DTC. Resolve all DTCs
before continuing this
procedure.
2.
If no DTCs were displayed
active during test, proceed to
Malfunction 3.
Check for excessive engine
1.
If engine load is excessive,
3.
Excessive Engine
load. (TM 5-3805-294-10)
configure proper engine load.
Loads.
(TM 5-3805-294-10) (Volume
(Volume 5, WP 0794)
5, WP 0794)
2.
If engine load is not excessive,
proceed to Malfunction 4.
Operate deep dig function and
1.
If deep dig function overloads
4.
Deep Dig Function
note if engine overloads. (TM
engine, discontinue this
Overloading
5-3805-294-10) (Volume 5,
troubleshooting procedure and
Engine.
perform procedure for Deep
WP 0794)
Dig Circuit Does Not Activate.
(Volume 2, WP 0301)
2.
If deep dig function does not
overload engine, proceed to
Malfunction 5.
0116-2