TM 5-3805-294-23-1
0115
Table 1. Engine Cranks/Will Not Start - Continued.
Test or Inspection
Corrective Action
Malfunction
9.
Replay recording (Volume 3,
WP 0364) and review the
recorded data points.
10.
While engine was cranking at
a steady speed were the
following data points indicated:
a. Crankshaft Position
Signal Status - Value
should be 16 at 0 rpm, 63
with engine cranking
(below 400 rpm), and 47
with engine running above
400 rpm.
b. Camshaft Position
Signal Status - Value
should be 16 at 0 rpm, 63
with engine cranking
(below 400 rpm), and 47
with engine running above
400 rpm.
c. Engine Speed Indicated
by Crankshaft Sensor -
The actual cranking speed
(nearly same as camshaft
position sensor speed).
d. Engine Speed Indicated
by Camshaft Sensor - The
actual cranking speed
(nearly same as
crankshaft position sensor
speed).
e. Crankshaft Position
Signal Improper Pattern
Indicator - 0
f. Camshaft Position
Signal Improper Pattern
Indicator - 0
g. Crankshaft Position
Signal Noise Indicator - 0
h. Camshaft Position
Signal Noise Indicator - 0
11.
When finished monitoring and
replaying recording, select
Readings and select
Disconnect From Model(s).
(Volume 3, WP 0363)
0115-6