TM 5-3805-294-23-1
0116
Table 1. Engine Does Not Develop Full Power - Continued.
Test or Inspection
Corrective Action
Malfunction
2.
Visually inspect engine wiring
1.
If damaged or has loose
harness connector J03 for
sockets, replace engine wiring
damage or loose sockets.
harness. (Volume 4,
WP 0510) Restore machine to
original condition and operate
engine through various rpm
ranges. (TM 5-3805-294-10)
(Volume 5, WP 0794)Clear
and refresh DTCs. (Volume 3,
WP 0362)
2.
If not damaged, and does not
have loose sockets, proceed to
Malfunction 34.
Visually inspect ECU
1.
If damaged or has loose pins,
34.
ECU Connector J03
connector J03 (Volume 5,
replace ECU. (Volume 4,
Has Damage or
Loose Pins.
WP 0800, Figure 146) for
WP 0508) Restore machine to
damage or loose pins.
original condition and operate
engine through various rpm
ranges. (TM 5-3805-294-10)
(Volume 5, WP 0794)Clear
and refresh DTCs. (Volume 3,
WP 0362)
2.
If not damaged, and does not
have loose pins, proceed to
Malfunction 35.
Measure resistance (Volume
1.
If less than 10 ohms, proceed
35.
Open Circuit
to Malfunction 36.
Between Engine
3, WP 0369) between engine
Wiring Harness
wiring harness connector P05
2.
If greater than 10 ohms,
Connector P05
socket 1 (Volume 5, WP 0800,
replace engine wiring
Socket 1 and
Figure 57) and engine wiring
harness. (Volume 4,
Engine Wiring
harness connector J03 socket
WP 0510) Restore machine to
Harness Connector
C1. (Volume 5, WP 0800,
original condition and operate
J03 Socket C1.
Figure 146) Note reading.
engine through various rpm
ranges. (TM 5-3805-294-10)
(Volume 5, WP 0794)Clear
and refresh DTCs. (Volume 3,
WP 0362)
0116-16