TM 5-3805-294-23-1
0123
Table 1. Engine Will Not Crank - Continued.
Test or Inspection
Corrective Action
Malfunction
2.
Visually inspect battery
1.
If loose, tighten terminals.
terminals for loose terminals
(Volume 4, WP 0496) Restore
and damage.
machine to original condition.
2.
If damaged, replace battery
cable(s). (Volume 4,
WP 0494) Restore machine to
original condition.
3.
If not damaged and does not
have loose terminals, proceed
to Malfunction 3.
1.
Remove engine compartment
3.
Starter Motor Has
lower access cover. (Volume
Damage or Loose/
Damaged
4, WP 0593)
Terminals.
2.
Visually inspect starter for
1.
If loose terminals, tighten
damage and loose/damaged
terminals. (Volume 3,
terminals. (Volume 3,
WP 0449)
WP 0449)
2.
If terminals are damaged,
replace starter positive cable,
(Volume 4, WP 0527) or
replace starter protection
wiring harness, (Volume 4,
WP 0528) or repair engine
interface wiring harness
terminal, (Volume 4,
WP 0511) or replace engine
interface wiring harness,
(Volume 4, WP 0509) or
starter ground wire. (Volume 4,
WP 0516)
3.
If starter is damaged, replace
starter. (Volume 3, WP 0449)
Restore machine to original
condition.
4.
If not damaged and does not
have loose terminals, proceed
to Malfunction 4.
0123-2