TM 5-3805-294-23-4
FIELD MAINTENANCE
ENGINE OIL FILTER HEAD REPLACEMENT
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
Filter Element, Fluid (Volume 5, WP 0798, Table
1, Item 208)
(Volume 5, WP 0796, Table 2, Item 119)
Seal, Plain (Volume 5, WP 0798, Table 1, Item
Cap and Plug Set (Volume 5, WP 0796, Table 2,
182)
Item 55)
Pan, Drain (Volume 5, WP 0796, Table 2, Item
55)
Personnel Required
Wrench, Universal Chain
Construction Equipment Repairer 91L (1)
(Volume 5, WP 0796, Table 2, Item 55)
References
Materials/Parts
TM 5-3805-294-24P: Fig. 71 (Volume 5,
Lubricating Oil, Engine OE/HDO 15W-40
WP 0794)
(Volume 5, WP 0797, Table 1, Item 18)
DA FORM 5988-E or DA FORM 2404 (Volume 5,
Tie Wraps (Volume 5, WP 0797, Table 1, Item
WP 0794)
56)
O-ring (Volume 5, WP 0798, Table 1, Item 229)
Qty: 3
Equipment Condition
O-ring (Volume 5, WP 0798, Table 1, Item 99)
Machine safely parked and shut down
Qty: 1
(TM 5-3805-294-10). (Volume 5, WP 0794)
Fitting (Volume 5, WP 0798, Table 1, Item 33)
Qty: 1
Time to Complete
0.6 Hour(s)
REMOVAL
WARNING
WARNING
Oil is slippery and can cause falls. To avoid injury, wipe up spilled oil immediately. Failure
to comply may result in injury or death to personnel.
During normal machine operation, lubrication system can become very hot. Do not
remove oil filter while lubrication system is hot. Allow lubrication system to cool prior to
removing oil filter. Failure to comply may result in injury or death to personnel.
0487-1