TM 5-3805-294-23-4
0537
TEST - Continued
and closer movement greatly improves the likelihood of finding a leak. Any increase in beep rate indicates a
leak.
NOTE
If a leak is found, it should be verified at least once.
6.
Blow compressed air in area of suspected leak.
7.
Move leak detector probe tip (Figure 1, Item 1) to fresh air and reset. Hold leak detector probe tip (Figure 1,
Item 1) probe tip as close as possible to indicate leak source and slowly move it around until leak is confirmed.
8.
Check area of suspected leak again.
9.
If leaks are found, repair leaks as necessary.
END OF TASK
FOLLOW-ON MAINTENANCE
Perform the Standard Follow-On Maintenance Instructions. (Volume 3, WP 0384)
END OF TASK
END OF WORK PACKAGE
0537-3/4 blank