TM 5-2420-230-24-1
a. Removal.
NOTE
Tag all hoses and tubes and note their positions before removal.
Cap and plug all tubes, hoses, and fittings upon removal.
Remove cable ties as necessary.
(1)
Loosen two hose clamps (1) on top of
coolant reservoir (2).
(2)
Remove hose (3) leading to radiator.
(3)
Remove hose (4) leading to thermostat
housing.
(4)
Remove overflow hose (5) from filler neck
on coolant reservoir (2).
(5)
Disconnect electrical wire (5.1) from low
coolant sensor (6) on rear of coolant
reservoir (2).
(6)
Loosen hose clamp (7) on bottom of coolant
reservoir (2) and remove hose (8).
(7)
Remove three self-locking nuts (9),
washers (10), and cushion clip (10.1)
securing coolant reservoir (2) to support
bracket (11). Discard self-locking nuts.
(8)
Remove coolant reservoir (2).
(9)
If necessary, remove low coolant sensor (6),
adapter (12), and filler cap (13) from coolant
reservoir (2).
Change 1
9-12
