TM 5-2420-230-24-1
e. Installation.
NOTE
Ensure all hoses and tubes are reconnected to positions noted prior to removal.
Install cable ties as necessary.
(1)
Position fan hydraulic motor (6) and fan
motor support (10) in engine bay.
(2)
Connect four hydraulic connector hoses (5)
to fan hydraulic motor (6).
(3)
Install fan motor support (10) to chassis with
eight bolts (7), 16 washers (8), and eight new
self-locking nuts (9). Tighten bolts.
(4)
Install fan blade (4) with six bolts (1), 12
washers (2), and six new self-locking
nuts (3). Tighten bolts.
f. Follow-On Maintenance.
(1)
Install radiator (Para 9-5).
(2)
Check hydraulic oil level and fill as
necessary (TM 5-2420-230-10).
(3)
Start engine (TM 5-2420-230-10) and check for hydraulic leaks.
(4)
Shut OFF engine (TM 5-2420-230-10).
END OF TASK
9-7. TRANSMISSION OIL COOLER REPLACEMENT.
This Task Covers:
a. Removal
b. Cleaning
c. Installation
d. Follow-On Maintenance
INITIAL SETUP
Test Equipment
Personnel Required
None
MOS 62B, Construction Equipment Repairer
Tools and Special Tools
References
Pan, drain, Item 29, Appendix B
None
Tool kit, common no. 2, Item 36, Appendix B
Equipment Conditions
Tool kit, general mechanics, Item 38, Appendix B
TM or Para
Condition Description
Hood raised.
Materials/Parts
Cap and plug set, Item 4, Appendix C
Cooling system drained.
Solvent, degreasing, Item 58, Appendix C
Drawings Required
Tags, identification, Item 63, Appendix C
TM 5-2420-230-24P Figure 30
Ties, cable, Item 68, Appendix C
Washer, lock, Item 280, Appendix D
Estimated Time to Complete Task
Refer to MAC in Appendix B
Change 1