TM 5-2420-230-24-1
(2)
Inspect air cleaner housing (8) for damage and/or deterioration.
(3)
Inspect air line (9), which services AIR FILTER RESTRICTION gauge (10), for signs of damage, looseness, and/
or deterioration.
(4)
If dust boot (7), sealing ring (4), air cleaner housing (8), or air line (9) is damaged or deteriorated, replace it.
c. Cleaning.
(1)
Wipe down cap (3), sealing ring (4), and air cleaner housing (8) with clean rag.
(2)
Thoroughly clean all dust from dust boot (7).
d. Installation.
(1)
Install dust boot (7) on cap (3).
(2)
Install new filter element (6) with wingnut (5).
(3)
Install sealing ring (4) on air cleaner housing (8).
(4)
Place cap (3) on air cleaner housing (8) with dust boot (7) positioned at bottom. Tighten wingnut (2).
(5)
Close air cleaner filter compartment (1).
e. Follow-On Maintenance.
Start engine and check AIR FILTER RESTRICTION gauge (10) to ensure it reads below 25 in. H2O
(1)
(2)
Shut OFF engine (TM 5-2420-230-10).
(3)
Remove "Do Not Operate" tag from ignition switch (TM 5-2420-230-10).
END OF TASK
Change 1
13-54