TM 5-2420-230-24-1
13-27.2. A/C FILTER REPLACEMENT.
This Task Covers:
a. Removal
b. Inspection
c. Cleaning
d. Installation
e. Follow-On Maintenance
INITIAL SETUP
Test Equipment
Equipment Conditions
None
TM or Para
Condition Description
Vehicle positioned on level
ground.
Tools and Special Tools
None
Parking brake applied.
Engine shut OFF.
Electrical master switch OFF.
Materials/Parts
Cloth, lint-free, Item 10, Appendix C
"Do Not Operate" tag attached
Filter element, Item 48.2, Appendix D
to ignition switch.
Personnel Required
Drawings Required
MOS 62B, Construction Equipment Repairer
TM 5-2420-230-24P Figure 187
References
Estimated Time to Complete Task
None
Refer to MAC in Appendix B
Do not operate A/C unit without filter installed. Failure to comply may result in damage to equipment.
a. Removal.
(1)
Loosen thumb screw (1) and remove cap (2).
(2)
Remove wingnut (3) and filter element (4).
Discard filter element.
(3)
Remove dust boot (5) from cap (2).
b. Inspection.
(1)
Inspect dust boot (5) for signs of damage or
(2)
Inspect A/C filter housing (6) for damage
and/or deterioration.
(3)
If dust boot (5) or A/C filter housing (6) is
damaged or deteriorated, replace it.
Change 1