TM 5-2420-230-24-1
a. Removal.
NOTE
If replacement of cab door becomes necessary, first install hinges to door and then install door to
cab.
Adjust hinges as required to ensure good fit of door with rubber seal making good contact with cab
around entire door perimeter.
(1)
Remove two screws (1), lockwashers (2), and door stop plate (3) from door assembly (4). Discard lockwashers.
(2)
Remove screw (5), rubber door holder (6), and nut (7) from door assembly (4).
A second mechanic must hold door in place while door hinge screws are being removed. Failure to
comply could result in damage to the door assembly.
(3)
Remove three screws (8) and door assembly (4) from bottom door hinge (9).
(4)
Remove three screws (10) and door assembly (4) from top door hinge (11).
(5)
If required, remove six threaded inserts (12) from door assembly (4). Discard threaded inserts.
(6)
13-63
Change 1