TM 5-2420-230-24-1
13-33. DOOR GAS STRUT REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Test Equipment
Equipment Conditions
None
TM or Para
Condition Description
Vehicle positioned on level
ground.
Tools and Special Tools
Tool kit, general mechanics, Item 38, Appendix B
Parking brake applied.
Engine shut OFF.
Electrical master switch OFF.
Materials/Parts
None
"Do Not Operate" tag attached
to ignition switch.
Personnel Required
MOS 62B, Construction Equipment Repairer
Drawings Required
TM 5-2420-230-24P Figure 193
References
None
Estimated Time to Complete Task
Refer to MAC in Appendix B
a. Removal.
(1)
Remove nut (1) and gas strut (2) from inner
strut bracket (3).
(2)
Remove nut (4) and gas strut (2) from outer
strut bracket (5).
b. Installation.
(1)
Install gas strut (2) on outer strut bracket (5)
with nut (4). Tighten nut.
(2)
Install gas strut (2) on inner strut bracket (3)
with nut (1). Tighten nut.
c. Follow-On Maintenance.
Remove "Do Not Operate" tag from ignition switch (TM 5-2420-230-10).
END OF TASK
Change 1
