TM 5-2420-230-24-1
a. Removal.
(1)
Remove four screws (1) and cab door lock (2) from door latch mount (3).
(2)
Remove four screws (4), washers (5), and door latch mount (3) from door assembly (6).
(3)
Remove three screws (7) and handle (8) from door assembly (6).
(4)
If required, remove two rivets (9) and door latch plate (10) from cab door lock (2). Discard rivets.
(5)
If required, remove nut, washer, and striker bolt.
b. Installation.
(1)
Install handle (8) on door assembly (6) with three screws (7). Tighten screws.
(2)
Install door latch mount (3) on door assembly (6) with four screws (4) and washers (5).
(3)
If removed, install door latch plate (10) on cab door lock (2) with two new rivets (9).
(4)
Install cab door lock (2) on door latch mount (3) with four screws (1).
(5)
If removed, install striker bolt, washer, and nut. Tighten nut.
c. Follow-On Maintenance.
Remove "Do Not Operate" tag from ignition switch (TM 5-2420-230-10).
END OF TASK
13-67
Change 1