TM 5-2420-230-24-1
13-31. DOOR HINGE REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Test Equipment
None
TM or Para
Condition Description
Vehicle positioned on level
Tools and Special Tools
ground.
Tool kit, general mechanics, Item 38, Appendix B
Parking brake applied.
Engine shut OFF.
Materials/Parts
Insert, threaded, Item 92, Appendix D (6)
Electrical master switch OFF.
Dunnage, suitable
"Do Not Operate" tag attached
to ignition switch.
Personnel Required
MOS 62B, Construction Equipment Repairer
Drawings Required
TM 5-2420-230-24P Figure 192
References
None
Estimated Time to Complete Task
Refer to MAC in Appendix B
a. Removal.
Failure to prop door when removing the hinges will damage the hinges or door.
NOTE
Upper and lower door hinges are removed and installed in the same way. Upper hinge is shown.
(1)
Place dunnage under door (1).
(2)
Remove six screws (2) and hinge (3) from frame (4).
(3)
If required, remove three threaded inserts (5). Discard threaded inserts.
13-65
Change 1