TM 5-2420-230-24-1
.
(8)
Measure and mark four hole positions on hydraulic step plate (98).
(9)
Using 13/64-in. drill bit, drill four holes in hydraulic step plate (98).
(10) Install trickle charger (99) on bottom side of hydraulic step plate (98) with four screws (100), washers (101),
lockwashers (102), and nuts (103).
d. Electrical Outlet
(1)
Measure and mark three hole positions on
battery box (84).
(2)
Using 1.75-in. hole saw, cut hole in battery
box (84).
(3)
Using 5/32-in. drill bit, drill two holes in
battery box (84).
(4)
Install plug holder (104) on cover (105).
(5)
Install cover (105) and plug holder (104) on battery box (84) with two self-tapping screws (106).
(6)
Install plug (107) in plug holder (104) until detent ball (108) locks into hole of plug holder (104).
Change 1
20-11