TM 5-2420-230-24-1
(15) Install ether start pushbutton (133) on side
instrument panel (132) with nuts (134)
and (135).
(16) Install terminal connector (136) to
wire (128).
(17) Install terminal connector (136) on ether
start pushbutton (133) with screw (137).
(18) Install terminal connector (138) and (139) to
jumper wire (140).
(19) Install terminal connector (138) on ether
start pushbutton (133) with screw (141).
(20) Remove screw (142) and wire (143) from
starter button (144).
(21) Install terminal connector (138) and
wire (143) on starter button (144) with
screw (142).
NOTE
Ensure decal is positioned near ether start
pushbutton on side instrument panel, and not
covering other decals.
(22) Install decal (145) on side instrument
panel (132).
Use care when routing wires to ensure wires
avoid hot or moving components. Failure to
comply will result in damage to equipment.
(23) Route wire (129) and tube (130) to engine
and secure with cable ties.
Change 1
20-15