TM 5-2420-230-24-2
Section 0 - Engine Disassembly and Assembly - Group 00
Turbocharger - Installation (0-116)
B Series Shop Manual
Page 0-107
If the drain tube in the block was removed, apply sealant
Part Number 3375068 to the sealing surfaces.
22 mm Open End Wrench, Hammer
Install the tube in the block so it is aligned with the turbo-
charger drain tube.
Screwdriver
Position the turbocharger drain hose to connect the drain
tubes; tighten the clamps.
13 mm
If loosened, tighten the turbocharger turbine housing
capscrews.
Torque Value: 20 Nm
[15 ft-lb]
L-196
