TM 5-2420-230-24-2
Turbocharger - Installation (0-116)
Section 0 - Engine Disassembly and Assembly - Group 00
Page 0-108
B Series Shop Manual
7/16 Inch
If required, loosen the compressor housing v-band clamp
and position the housing to align with the air crossover
tube.
7/16 Inch Plastic Hammer
Tighten the band clamp. Tap around the clamp with a
plastic hammer and tighten again.
Torque Value: 8.5 Nm
[75 in-lb]
Screwdriver or 5/16 inch
Install the air crossover tube and clamps and tighten.
Torque Value: 8 Nm
[71 in-lb]
5 Nm
[44 in-lb]
Install the boost control capsule actuator hose.
L-197
