TM 5-2420-230-24-2
Section 0 - Engine Disassembly and Assembly - Group 00
Belt Tensioner - Installation (0-120)
B Series Shop Manual
Page 0-111
Belt Tensioner - Installation (0-120)
5 mm Allen
Install the tensioner bracket to the cylinder head.
Tighten the socket head screws.
Torque Value: 24 Nm
[18 ft-lb]
13 mm
Position the belt tensioner on the bracket and secure it
with the capscrew.
Torque Value: 43 Nm
[32 ft-lb]
NOTE: Some tensioners can be bolted to two different lo-
cations on the bracket. Install into the location dictated by
your requirement.
Water Inlet Connection - Installation
(0-121)
Caution: Do not tighten at this time. To avoid misalign-
ment and overstressing the lower support mounting ear
on the alternator, leave the capscrews loose until all the
alternator parts are installed.
Install the water inlet connection and sealing ring.
Alternator - Installation (0-122)
10 mm
Assemble the alternator bracket to the thermostat hous-
ing.
Torque Value: 24 Nm
[18 ft-lb]
L-200