TM 5-2420-230-24-2
Section 0 - Engine Disassembly and Assembly - Group 00
Thermostat - Installation (0-117)
B Series Shop Manual
Page 0-109
Caution: The Turbocharger must be prelubricated.
Pour 50 to 60cc [2 to 3 oz.] of clean engine oil into the oil
inlet fitting on top of the turbocharger while spinning the
turbocharger impeller to distribute the oil in the bearing.
16 mm and 19 mm
Install the oil supply line.
Tighten the fittings securely.
Torque Value: 15 Nm [11 ft-lb]
35 Nm [26 ft-lb] (on turbocharger)
Connect the aftercooler coolant supply tube (1) and the
coolant return tube (2).
Thermostat - Installation (0-117)
``Package'' the lifting bracket and thermostat gasket to
the thermostat and thermostat housing. Position the rub-
ber seal as shown.
L-198