TM 5-3805-280-24-2
System Controls
1--Harness Connector
3--Slots (3 used)
5--Control Console
2--Mounting Plate
4--Hand Knobs (3 used)
4. Install control console (5) by sliding through slots
1. Disconnect harness connector (1) from control
(3) in mounting plate (2) and tighten hand knobs
console (5).
(4).
2. Loosen three hand knobs (4).
5. Connect harness connector (1) to control console
(5).
3. Remove control console (5) by sliding through slots
(3) in mounting plate (2).
CED,OUOE023,1 1927MAY992/2
16
1675
9
16-78