TMT5-3805-280-24-2
M 5-3805-280-24-1
System Controls
REMOVE AND INSTALL ROCK DRILL START--STOP SELECTOR CONTROL BOX
16
1675
10
1--Start--stop
2--Harness Connector
4--Cover
selector control box
3--Phillips Screw (4 used)
5--Phillips Screw (2 used)
5. Install and tighten cover (4) using Phillips screws
1. Remove harness connector (2).
(3).
2. Remove Phillips screws (3) and remove cover (4).
6. Install harness connector (2).
3. Support start--stop selector control box and
remove Phillips screws (5).
4. Install and tighten start__stop selector control
box using Phillips screws (5).
CED,OUOE023,2
1927MAY991/1
16-79