TM 5-3805-281-24-2
Removal and Installation
INSTALL FUEL SUPPLY PUMP
IMPORTANT: Before installing supply pump, test
pump to make sure fuel will not leak
around spindle and spindle seal.
1. Install a new gasket on supply pump mounting face
and position pump over mounting studs.
2. Tighten mounting stud nuts.
Fuel Supply Pump Mounting Stud Nut--Specification
Torque ........................................................ 5--7 Nm (4--5 lb-ft) (45--60
lb-in.)
3. Install fuel inlet and outlet lines and tighten all
04
connections securely.
0400
27
4. Bleed fuel system. (See procedure in this group.)
CED,OUOE024,209
1914MAY981/1
