TM 5-3805-281-24-2
Crankshaft, Main Bearings, and Flywheel
THRUST BEARING NEW PART
SPECIFICATIONS
IMPORTANT: Install thrust bearing in cylinder block
and tighten to specification before
regrinding or polishing thrust surfaces
to assure that all surfaces on bearing
and on block web are correctly aligned.
Thrust Washer Clearance Base Circle--Specification
Diameter ................................................................ 129.286--130.810 mm
(5.09--5.15 in.)
Thrust Bearing--Specification
Thickness............................................... 37.44--37.54 mm (1.474--1.478
in.)
Relief Angle ........................................................................................... 45
Thrust Bearing Cap--Specification
Overall Width ( --1995) .......................... 41.81--42.31 mm (1.646--1.66
in.)
Overall Width (1995--).......................... 39.16--39.66 mm (1.542--1.561
in.)
Thrust Bearing Measurements
Maximum runout for thrust surface is 0.25 mm
(0.0010 in.).
RG,RG34710,1174
1923OCT971/1