TM 5-3805-294-23-1
0021
Table 1. DTC 100.01 - Engine Oil Pressure Signal Extremely Low - Continued.
Test or Inspection
Corrective Action
Malfunction
3.
Turn the key switch to the ON
position, but DO NOT START
ENGINE (TM 5-3805-294-10).
(Volume 5, WP 0794)
4.
Select Readings and select
Connect to Model(s). (Volume
3, WP 0363)
5.
Select Dearborn Protocol
Adapter (DPA 4+) USB for the
Readings Adapter, and select
OK. (Volume 3, WP 0363)
6.
Select Engine Control Unit
(ECU) Only. (Volume 3,
WP 0363)
7.
Under Connected Data Points,
select ECU - (shown with
engine serial number).
(Volume 3, WP 0363)
8.
Under ECU - (shown with
engine serial number), select
ECU - Data List - All. (Volume
3, WP 0363)
9.
Under ECU - Data List - All,
select Engine Oil Pressure
Input Voltage. (Volume 3,
WP 0363)
10.
Monitor the Engine Oil
Pressure Input Voltage.
Voltage should be between 0.3
to 0.7 volts. Note reading.
11.
When finished monitoring,
select Readings and select
Disconnect From Model(s).
(Volume 3, WP 0363)
12.
Select Yes to terminate your
readings connection. (Volume
3, WP 0363)
0021-5